You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4043 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Monday, April 1st 2013, 7:13pm

by Wet_Boots

You need to go over the water supply to be certain that there isn't a partially closed valve in there.

A malfunction of the anti-syphon valve is possible. One check is to open it manually with the tiny "bleed screw" on top of the valve. Check that the valve doesn't have a flow control that is partially closed.

Monday, April 1st 2013, 5:06pm

by jcat (Guest)

reply

I cleaned the index valve (nothing was in there, but i cleaned whatever I could anyway), replaced the plunger thing inside (even though the one I had was new), still have both zones coming on. Is it possible my city water pressure coming in isn't high enough to push the plunger fully down so only one zone is active? or

Thursday, March 28th 2013, 7:49pm

by Wet_Boots

Make sure the antisyphon valve isn't partially closed. Next would be a cleaning of the index valve.

Thursday, March 28th 2013, 5:58pm

by jcat (Guest)

2 zones on at same time

I'm using city water -- I have a intermatic timer, a rainbird antisiphon valve, and a 4 outlet index. I currently only have 2 zones hooked up to the index with the 2 zone cam. When I initially hooked the system up a week or two ago, both zones came on independently and worked fine. Now, when I manually turn on the system from the controller, both zones come on at the same time with low pressure. If i flip the switch dozens of times, eventually one zone will come on alone and will work fine. then when i shut it off and turn back on, it goes back to the same problem of both zones running at same time with low pressure.

What could be causing both zones to come on at once... is there something not triggering the index to shut one zone and move to the other? why is it trying to run both simultaneously?

I live in Central FL, no freezing or anything...