Thanks for your response. The valves from the damaged section are gone. They were dug up during the construction. I have rerouted the water back to the remaining areas. When I turn the water back on, one zone begins to work. I then try to get the controller to cycle through the remaining zones, but nothing happens. The one zone just keeps spraying until I turn the water back off. Any ideas on how to trouble shoot or get the remaining zones functional? Thanks for any help!
Recently had construction done at my house. Zones located in the backyard were cut and removed. I have found cut pipes and repaired to try and get frontyard zones working again. Backyard zone wires are cut and do not terminate to anything. When I turn on water, it flows to a single zone in the front, which seems to be working fine. I have tried to cycle the zones using the controller, but no other zones will work. Just the single zone. I assume that the "last" valve is open and that is why only ...