Ok guys, I replaced the bonnet and diaphram in the valve and IT WORKS great! Now I just need to figure out how to dial in the flow control on the SRV bonnet to adjust the amount of water coming out. It just seems to have a little too much coming out. Either that or it has been so long scince it has worked I have forgotten how much water came out. I want to thank everyone who replied for your input and for passing on your Sprinkler Knowledge and Know-How to us beginners. I hope I dont have any mo...
Thanks for everyones replies! I will be out of town through the weekend and upon my return will post the outcome of my attempt to get the zone working again. Wish me luck....and thanks again!
****o, I have Hunter SRV valves in my irragation system with three zones. One of the zones is not functioning. Turn it on and I can hear the water come up to the valve and then nothing. When I turn the valve on maually it seems to be leaking at the bottom of the soleniod. So I guess my question would be, is a good place to start possibly replacing the "guts" of the valve and/or replacing the "guts" of the valve and replacing the solenoid? Is it possible the solenoid pin is not sealing properly? ...