Search results
Search results 1-11 of 11.
4 valves in a standard 12x17 would work fine
i would suggest using a master valve. there's no reason not to unless u wanted to have garden hose attachments away from the house
make sure both ports in the solenoid chamber are clear of debris, strip the paper off of a twist tie and slide it through both the holes to make sure they are clear.
first of all, if waves are a problem put the pump up on a platform (a platform built on top of 4 4x4 posts. also put electrical outlets and or switches at raised level, second, algae shouldn't be a problem with pop up rotors or sprays if the intake is filtered.
gpm (per minute, not hour)
hunter i-20's carry a 5 year warranty and are much more sturdy than a rain-bird 5000
don't forget the end strips
i agree, center strips should work well. Just space heads 15' apart.
i-20's also have a 5 year warranty and a stronger retraction spring
sch. 40 is not uv resistant and i would not suggest u use it. Use sch. 80 and if you're going higher than a few feet, i would suggest using either galvanized or copper (copper looks nicer)
1/2" pvc riser extension?
