Good afternoon, I am trying to buy just one type of drip emmiter. With the difrent coolers meaning difrent amounts of GPM it has been a pain to sort out. Any how what do you all recomend. I use Aggerfirm (sp?) rain bird and DIG. They need to be presure comp AND self flushing as I am on a well and the presure goes between 30 and 60 PSI depending on where they are in the yard. Thnaks Tim
I am on a well so the presure is between 30 and 50 as it cycles on and off. I am running roters (Orbit and hunter). I would guess that 10 to 15 lbs of friction losss that is not an option..... howmuch back presute and a 3/4 valve with back flow handle? TimCA
Just a quick question, I use drip irragation on everything except my lawn. How should I set up fo the 4' new plant vs the 1 G plant v the 5g tree ve the 4" pot that is now one year old and 3 ft high. The normal "if it looks like it is wilting water it" wont do [] I want my plants to thrive. Thanks Tim CA
Good afternoon, I live on 2 acres, the lot is about 600 x 300. The height from front to back (elevation change) is about 100 ft. When I bought the house the irrigation system was in. Most of the valves ate at the house , about half way up the hill. Most of the rotors and drip are above the house. I just read that the Antisiphon valves that are installed must be installed 6 higher than the highest sprinkler. This is not the case
.. The highest sprinkler is about 20 ft above the valve. What sho...