Quoted from "mrfixit" Hi Rob, what you've described could be a number of things. We already know the valves have water because you can turn them on manually at the valve so nobody has turned the water off. It could very well be that old controller you have but not necessarily. It could be a broken ground wire. That ground wire attaches to all the valves. It's hard to tell from here. You'll need to be able to test the controller and wiring at the valves. Also the two valves that only operate man...
Hi i'm am new to this. I have an imperial valet system. We can not turn on any zone from the controller. And for zone one and 2 we must take out the pin from the thing in the ground. What are we doing wrong. pleae help if you can.