Well, I was wrong. The above isn't cycling, just staying on zone 1, which, to me means that something isnt stopping the flow of water. So, there are 2 little round boxes near the spigot coming out of the ground. Is that where the main pump is? How do I know which one is the problem? Do I need to dig up both? And how deep do I need to dig to get these out and do I need to completely move them from the ground in order to replace a part? Like I stated before, I am completely new to this, just tryin...
The controller box in garage is a Nelson SmartZone EZ. Not sure if this is helpful, but figured I should add it just in case.
Well, I am trying to help fix my grandmother's sprinkler system. Each zone controlled by separate hose spigots around the house. The front yard has three zones connected to the front spigot. each spigot has the /o\ looking control switches on the spigot. Anyways, My problem is that the front yard zones will turn on whenever the hose is turned on and will rotate through the front yard cycles (3) and will flow continuously until the hose is turned off. these are supposed to be controlled by the ma...
