Thx dude! I'll try it tonight. I'm hoping that the wiring is the issue. But if not, is It possible I contaminated the other valves?? I'm just dreading the possibility of taking all the valves apart.
Here's the facts: > 5-zone system with 6 valves (Zone 2 is sprayer and has 2 valves) > Zones 1 thru 4 operational; Zone 5 completely broken so I installed new pipe, heads, and replaced valve/solenoid > Zone 4 and 5 valves tied into same wire nut on neutral/return > After replacing Zone 5 valve, Zones 4 and 5 are fine from control box, but Zones 1 thru 3 valves aren't operating. Can push water thru the valves manually but not electronically. Any advice? I know I'm getting power because Zones 4 an...
