Thanks for the info- I tried the disconnecting one or the other. As long as #7 or #8 is turned on and one of the wires is connected, it sets off both zones. I then tried to check if the controller was working correctly by setting just #8 to turn on w/out wire being connected, but the #7 wire was still connected to the #7 postion. Nothing came on. And I did it vice versa. Controller seems likes its working correctly. I think it the wiring somewhere along the line. Haven't checked the valves? What...
Just recently had a home inspection and the following was identified: Zones 7 and 8 on the control box are the same area. I've gone to the control box Irritrol KD-9 and have manually tested the different zones. When I tested zone 7 by iteslf, both 7 & 8 came on. And vice versa with zone 8. Trying to figure out how to seperate the zones to where just one runs when turned on. Thanks for any help.
