Thanks for your help mrfixit. I will look into irritrol.
I realized I put this in the repair section so I moved it to the design section as it is probably more appropriate for it. Im looking at installing RB 3500s throughout my back yard... Are RB 3500 the best in the class or am I better off going with a different make or model? Thanks, Anthony
Im looking at installing RB 3500s throughout my back yard... Are RB 3500 the best in the class or am I better off going with a different make or model? Thanks, Anthony
Yes the valves are brand new. Like I just took it out of the box new. There is no flow control on the valve. I took the valve completely apart, and cleaned everything and flushed it thoroughly. Honestly I feel i made a bad choice with these valves, and am considering returning them and installing a different kind. What would you recommend?
Hey all, I just finished installing my sprinkler system in the back yard, and zones 1 and 2 work perfectly. Unfortunately zone 3 is not. The sprinklers arnt popping up all the way and it seems like there is a lack of flow. I feel like the valve isnt working properly on that zone, since the other two zones, have the same amount of sprinklers and the same water pressure, and are working fine. The Rainbird ASV makes a very weird noise when I close it using the bleed screw too. I was tinkering with ...
