I checked the voltage on the controller for each station per the manual and I am seeing 29 volts when the station is activated which is good. I was able to manually turn on the zones and they work. I checked the wiring going from the controller to the valves and it looks good. I dont know how to take the cylenoid apart to check the voltage there. I do not hear any humming or noise from the cylenoid.
Yes I do have a rain sensor...Should I take it off or disable it? If so how?
Hello, I have a RainBird ESP 6-TM and the sprinklers do not come even though the controller is Running through the Zones. They have come on a couple times in the last few weeks. I believe the trouble started after a storm so may be lightning related. I have reset and replace fuse and battery. The Controller appears to working fine , but sprinkers will not come on. Zones date and time are all programmed. Nothing happens on manual either.
