Quoted from "Wet_Boots" Get a multimeter and check the system wiring. I did. It shows voltage going to all 6 zones even though only zone 1 or zone 2 is active. Same test using multimeter on my neighbors controller shows voltage only on the active zone. Thanks.
I have a hunter controller. About 15 years old. During the last scheduled run no water came out of any zones. The controller counted down fine. I have reset the controller without success. I have swapped the controller with a new one same results. I checked the wires at the controller; basically when a zone is active, all the wires have voltage. I compared that withy neighbor who has the exact controller and when his is running in one zone only that zone has voltage. What does that mean? Is my c...
