Thanks Wet_Boots. I'll give the tank and pressure switch some more thought. Mudman
What pressure control valve have people found to be effective? I have a Goulds 2 hp pump which has a maximum pressure of about 55 psi (128 ft head). My main concern is assuring I don't damage the pump if I inadvertently run it with all valves closed. What pressure do you recommend I set the PCV at? Thanks, Mudman
I'm looking for some creative ways to expand my current system. I want to add 8-10 valves to my system by extending my current trunk line. My current system uses a pump for the water supply and has two Orbit 12-station timers located at the same location. The end of my trunk line where I want to expand the system is 300 ft from the timers and 400 ft from the pump, so I'm trying to do this without running any wires back to either the timers or the pump. I have two valves installed in the current ...