Zone not working
I have been having a problem with my zone 6, at first I thought it was the solenoid, so I replaced it, and it was working again. Well, it stopped. I had a guy come out and take a look, he checked the solenoids (as did I doing the three 9 volt battery trick) and they are good. He suggested I change the diaphragm, so I did that, and still no water.
So today I turned off the water, flipped on zone 6 and then took the solenoid out. The plunger fell out, so I started wondering if it's a wiring issue since the zone will come on if I do it manually at the valve. So I put the solenoid back in, and turned on the water. This time zone 9 came on, so I turned off zone 6 and turned on zone 9, and zone 9 came on again. I'm almost ready to just pulling out the hose a few times a week and watering the old fashion way, but I figured I would turn to the power of the Internet! Thanks in advance for any help.
darren