One zone will not come on

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

MargeeTx

Starting Member

Posts: 1

Thursday, June 3rd 2010, 2:13pm

One zone will not come on

We have a TORO Vision I system...not sure how old it is. I have never had a manual, and thus have always simply operated it on the manual method. There are 6 zones. Hubby and I checked all of the heads, etc. on Saturday, and all zones were coming on fine. Yesterday, zone 6 refused to start. Question: does anyone know: are all of the valves in the large valve box and would this be where the solenoid is? Or would there be a valve buried in each zone?

Should I unscrew the bottom of the control box and check the wires? Hubby is pretty handy and would die if he knew I was asking this stuff!!! Any help will be appreciated, and I will try to tell him without being a nag!

Go to the top of the page
Quote

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

Friday, June 4th 2010, 7:28am

Be methodical and do some resistance measurements, and see if that doesn't flag the fault.

Go to the top of the page
Quote

Similar threads

- Controllers »
- 5 valves - 10 zones? (Apr 8th 2010, 1:54pm)
- Controllers, Sensors, & Remotes »
- ranbird will runs zone 3 instead of 4. 4 works if i manually open the valve (May 2nd 2010, 12:11pm)
- Not Sure What's Wrong? »
- low pressure in one zone (Mar 27th 2010, 9:56am)
- Valves & Wiring »
- Irritrol 2600T and Hammering (Jun 4th 2004, 7:15am)