Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
What body are you using?
Kiril
Unregistered
What body are you using?
I am using the standard (as far as I know) Hunter Water body. Thinking about it, I think my problem may lie with the pressure - it is perhaps higher than I thought, in which case the area will be larger than I expected and I just have to move the rotator a little further from the drive.
But I am still wondering if others have found that the area watered is more elliptical than rectangular (though hard to define precisely, obviously) and what the ring adjustment does. It says somewhere that it adjusts the right edge in case of curved strips, so perhaps that is why I don't appear to have a rectangular area - but I haven't been able to figure out how the adjustment works exactly.
Thanks.
You always need to use a PRS (pressure regulating model) spray body for the MP series nozzles. Hunter makes a body specifically for the MP nozzles regulating the pressure at 40psi MPR40
Look for the grey cap on top.
If you want to maximize your radius reduction, you need to put it on a body with 30 PSI regulation (ex. RB 1800 series with PRS)