You are not logged in.

Replacing old control valves

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

cycleruss6

Unregistered

1

Friday, February 8th 2013, 10:07am

Replacing old control valves

I have an older system in my front yard now. The solenoids are cracked and do not work. The manufacturer is out of business and I am unable to find a replacement. The valves are 1 1/4" with hard piped lines. My question is; should I replace the valves with a 1 1/2" valve or a 1" valve? Will either of these soultions work? I am also planning to add two more zone to my system, approx 12 heads. Any advice offered would be appreciated.

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Friday, February 8th 2013, 2:43pm

try to post a photo of the old valves

Since we don't know what heads you are talking about, there is no way for me to turn "12 heads" into a rate of flow to match a valve to

Similar threads

Rate this thread