You are not logged in.


Starting Member


Monday, March 18th 2002, 4:05pm

Solenoid replacement or the top of the valve?

I need a solenoid for a hunter hpv 1 inch valve. Do you sell just parts for a valve such as solenoids or diaphrams?

Posts: 60

Location: USA


Monday, March 18th 2002, 4:08pm

We only sell the complete valves and not parts since it is better to buy the valve and take the top off the new valve and replace the old valve top. Plus a new valve is cheaper than if you buy the parts separately. This way you will end up with a new diaphram, solenoid, and internal filters. You will have a new valve since the bottom body piece is only a PVC base and does not go bad. The trick is you must use the exact model valve as the old valve. If you can not find the same valve (if yours is so old that we do not have it online) then we suggest you replace the entire valve.

Here is the link to the HPV valves on our website:
<img src=icon_smile.gif border=0 align=middle>

Rate this thread