You are not logged in.

I am New Here, where do I start?

  • 1
  • 2

mrfixit

Moderator

Posts: 1,506

Location: USA

11

Saturday, May 19th 2012, 1:22pm

Call a different company. They obviously don't know what they're doing.

GatorGuy

Moderator

Posts: 458

12

Monday, May 21st 2012, 8:27am

I'll agree with mrfixit.

Sounds like they may have cut or not reconnected the common wire.
They should be able to figure that out quickly.

GaryR

Starting Member

Posts: 1

13

Tuesday, November 28th 2023, 10:58am

Flow rate

Hi all. New to the forum. I’m beginning the design of my irrigation system and I need to know the flow rate of my 3/4” pex line where I’ll be tapping into for my system. There is no place to cut into to get a temporary valve to check flow rate with a bucket and timer as it’s in the meter pit and I’ll need to get a plumber to install the connection for my system. The house is a brand new build in a new subdivision and pressure and flow is great, just can’t conveniently measure it. Wondering if anyone with a 3/4” feed off the meter knows what their GPM is which could give me an idea of what to expect for design purposes? Thank you!

mrfixit

Moderator

Posts: 1,506

Location: USA

14

Tuesday, November 28th 2023, 1:13pm

Maybe you can measure gallons per minute by reading the water meter.
Maybe have the plumber install the connection first then measure then design.
  • 1
  • 2

Similar threads

Rate this thread