You are not logged in.

new controller

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

bzook@aol.com

New Member

Posts: 2

Location: USA

1

Thursday, June 8th 2006, 1:35pm

new controller

My old controller died. It was a Richdel 8 zone model 508PR. This model also has a pump wire connection along with the zone wires and common wires. I replaced it with a Hunter 9 zone SRC Plus, and I notice no place to connect the pump wire. The manual shows that it can be connected to a seperate pump start relay. Do I need to purchase one of the pump start relays or is there a place on this controller to connect the pump wire? The directions are a little unclear.
bzook

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Thursday, June 8th 2006, 3:43pm

Use the MV terminal - Master Valve is the same as Pump
Rate this thread