You are not logged in.

pop up problem

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

ufalco

Senior Member

Posts: 36

1

Thursday, May 3rd 2007, 6:32am

pop up problem

i have a 4" pop up hunter head it seem and it started not to long ago
that every time it ups up i found the spray in a different position. i manual adjusted with no success.i replace the inside of the head and left the body there.problem still persist.any idea or help will be appriciated thanks in advance. [:(]

gregory1420

Advanced Member

Posts: 62

2

Thursday, May 3rd 2007, 4:23pm

maybe the plastic bottom of the pop up is broken the little tabs in the body maybe there are no tabs left

ufalco

Senior Member

Posts: 36

3

Friday, May 4th 2007, 3:34am

i replace the inside of the pop up one already i'll inspect the all think thanks.

ufalco

Senior Member

Posts: 36

4

Wednesday, May 9th 2007, 4:39am

ok i finally inspect those pop up and they look ok. i replace the inside of the heads with new popup and spring just in case. i have 5 hunter head with rainbird spray on these zone and two of them everytime a new cycle starts the spray is pointing not in the direction a place them. any help please i'm going insane i can't believe that is happing only on those two heads in all of my 5 zones.

jmduke7

Advanced Member

Posts: 158

Location: FT. Walton Beach, Florida

5

Wednesday, May 9th 2007, 6:41pm

Are they the Hunter SRS series Sprays? If they are, I would replace the whole thing, not just the internals. Try and go with a Hunter Pro Spray or a Rain*Bird 1800 Series spray body.
Josh
Irrigation /Landscape Lighting / Pump and Well Specialist

lush96

Advanced Member

Posts: 138

6

Wednesday, May 9th 2007, 8:04pm

hunter adjustable sprays will sometimes open up more or close if the pressure is high. never use an adjustable hunter spray as a full circle as they tend to "close" under high pressure. they supposedly fixed this problem but i dont believe it as i have had problems from customers who have these heads still to this date.

ufalco

Senior Member

Posts: 36

7

Thursday, May 10th 2007, 4:51am

ok thanks to all. last night i rechecked and notice the inside of the body the groves(tabs) were worn out at the top of the head body unit. i'm sorry i did not understand earlier reply from gregory1420. it would have save me a few days.part of learning thanks again to all

ufalco

Senior Member

Posts: 36

8

Friday, May 11th 2007, 3:39am

one more thought.
yes i do use srs hunter spray, sois either the Hunter Pro Spray or a Rain*Bird 1800 Series spray body same as hunter srs. because i have a good # of the guts the pop up and spring and all of the srs stuff.would i be able to use those in the new spray as a spare part

jmduke7

Advanced Member

Posts: 158

Location: FT. Walton Beach, Florida

9

Friday, May 11th 2007, 2:03pm

No. they are not the same. Close, but not close enough.... I would suggest changing them out to either a Hunter Pro Spray or a Rain-Bird 1800 series Spray. The SRS Series was notorious for this very problem. You want to look for a spray body that offers a slip / click adjustment clutch. It will be the extra plastic piece at the bottom of the spring on the riser / piston body.
Josh
Irrigation /Landscape Lighting / Pump and Well Specialist

ufalco

Senior Member

Posts: 36

10

Thursday, May 24th 2007, 6:40am

i desided on the hunter pro. i got them yesterday and i'm very impressed. thanks guys for all of your suggestions i'm very happy.
Rate this thread