Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Replacing Controller
I have a very old Rainbird CRC-6A controller that I am replacing with a Hunter SRC-600i. I am a little confused with my wiring and was wondering if anyone knew where I can find information on wiring up a Rainbird CRC-6A. I figured if I can get more information on how the original controller is wired it may shed some light on what some of the wires lead to. The original setup is connected with a rain sensor and also a relay that fires up my pump. The new setup will also include a rain sensor (The wireless Hunter rain/freeze clik) and will be connected to a relay switch for turning on the pump. Any help would be greatly appreciated.
www.rainbird.com/diy/literature/timers.htm
(scroll down about half way)
Josh
Irrigation /Landscape Lighting / Pump and Well Specialist
http://www.rainbird.com/pdf/diy/man_CRC.pdf
I had checked that out previously. It looks like the manual only has information on programming the timer and I didn't see anything in there about wiring.
If you can't identify which of your wires are which, it might be time to call in a professional.
I was able to trace the wires to find out where they went so everything is now working great. I was just doing some research to try and make the job a little easier. Thanks for trying to help.