You are not logged in.

Model ESP 6si

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

p_montana

Starting Member

Posts: 1

Location: Ft Worth, TX

1

Wednesday, June 6th 2012, 6:20pm

Model ESP 6si

Experienced a power outage in our area the other day. Electricity was out for approx hours. All sprinkler heads work with no irregularities. I had to reset the Controller. The time of day is inputed correctly, just Program "A" has been selected with a singular watering time, the slide is set for fixed at number 2 (every other day) and the watering station times were set and reflect correctly when the selection dial is placed on each individual station. THE PROBLEM--all though Stations vary from 7 to 15 minutes watering time, when the selector is placed on auto to begin watering, the LCD reflects either 2 minutes or 1 minute for each station. Unable to remove these two default times. Any suggestions would be appreciated.

Paul

hi.todd

Supreme Member

Posts: 417

Location: Houston, Texas

2

Wednesday, June 6th 2012, 6:47pm

Try to reset the controller, unplug it.

Take out the fuse.

Take out any back up battery.

Wait 5 minutes.

Put it all back together and if that worked great!!

If not, time for a new controller.

Good Luck :thumbsup:
:thumbup: :thumbsup:

Similar threads

Rate this thread