You are not logged in.

Hunter Xcore installation on 220 VAC system

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

amari

Starting Member

Posts: 1

1

Sunday, June 1st 2014, 1:35pm

Hunter Xcore installation on 220 VAC system

Hi,
I'm a home owner with an old Hydrotek model 2520 with a two zone Hydrotek 4000 valve system. I recently purchased the Hunter Xcore however don't know how to install it as the wiring is different. The old system uses 220 VAC with copper wires and I don't know how to install the hunter X-core with this configuration.


Can anyone help?

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Sunday, June 1st 2014, 2:29pm

If there's a pump in the sprinkler supply, then you shouldn't have bought the X-Core. The original controller is designed to directly power a pump, and to provide the delay between zones that is needed by the indexing valve that feeds the two zones.

Similar threads

Rate this thread