rocky2<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by RidgeRun05</i>
<br />Rocky,
First of all, anything is better than the Nelson heads, they are junk. Secondly, I would suggest the PGP or I-20 Rotor from Hunter. Each contractor has their own preference as far as sprinkler heads go, and so opinions will vary. I do know that I have installed many many PGP and I-20 sprinkler heads, and have never had a problem. For the money, the PGP is an excellent sprinkler. As for replacing heads a zone at a time, that should be alright. As long as all the sprinkler heads on that particular zone have the same precip. rate, you will be fine. Good luck with whatever you choose.
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
Hi
Thanks for your reply,I think I will tke the PGP heads,My question is,can I take out the nelson 6000 heads and replace with the PGP heads without digging up around the heads,this would save a lot of work,Appreciate it if you could tell me how you replace the heads.
thanks
Rocky