Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Hose clamps and poly pipe
I'm using PVC for my laterals. To attach the sprinkler heads, I am using PVC female threaded fittings that have plastic barbed fittings screwed into them. I'm using poly pipe for the run from the lateral to the sprinkler. These are clamped down with hose clamps.
My problem is this... I think I'm really tightening the hose clamps, but the water is still leaking out of the fitting (at the poly and barbed end connection). I've looked online and I'm using the same type of fitting sold for poly pipe. So, am I just not tightining the hose clamp enough? Short of breaking the barbed fitting, can you get them too tight?
Kevin
Is the clamp positioned over the barbs on the poly pipe fitting?
Um, no. I was putting them closer to the end of the poly, after the barbs. Is that what I'm doing wrong?
always clamp over the barbs
You also want to make sure the barb fittings are fully inserted into the poly pipe. Pushing them in only half way may cause them to leak or even come out of the pipe later on down the road.
Tony Posey
Ridge Run Landscapes