You are not logged in.

Sprinkler Head Problem

PaulHe

Starting Member

Posts: 1

1

Friday, May 31st 2002, 6:10am

Sprinkler Head Problem

I have a Raintree Rotor Spinkler Head, mode 2045a that will not move.
The arm that should bounce off the spray is not doing so. I checked the head and it appears that there is still a spring attached but the arm just lays against the spray of water.

Any idea of what is wrong or the adjustment I need to make?

RVLI

Supreme Member

Posts: 462

Location: USA

2

Monday, June 24th 2002, 12:31pm

I have no expirience with impacts, but what I would do is just replace the whole head.

Rays Sprinklers

Supreme Member

Posts: 493

Location: USA

3

Monday, May 12th 2003, 10:14am

I do not use impacts but i do have a wide range of knowledge about them.
The head is broken, your spring which releases the arm, you have to install a new
head or better yet convert to gear driven without diging.

Buy Hunter ATR impact replacements which slip into the impact canister

Ray
Rays Above and Beyond Automatic LAwn Sprinklers

Raymond Padula Jr.
Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers

Rays Sprinklers

Supreme Member

Posts: 493

Location: USA

4

Monday, May 12th 2003, 10:16am

I do not use impacts but i do have a wide range of knowledge about them.
The head is broken, your spring which releases the arm, you have to install a new
head or better yet convert to gear driven without diging.

Buy Hunter ATR impact replacements which slip into the impact canister

Ray
Rays Above and Beyond Automatic LAwn Sprinklers

Raymond Padula Jr.
Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers
Rate this thread