Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Changing Control Valve Brand
Can I replace a Toro Valve with a Hunter Valve, this forum and my experience indicates Hunter is a higher quality product, in general.
I want to replace two Toro control valves for use with an Toro Vision 1 Sprinkler Timer/Controller (Model 188-96-02, Serial 38613). While it is tough to confirm, I believe the current valve is the Toro 254-16-04. The sprinkler warehouse apparently does not handle this valve model but I have found it elsewhere.
Would the Hunter PGV Male Thread x Barb Control Valve, PGV-101MB offer an acceptable alternative that will work with my Toro Timer/Controller?
It's a whole lot easier to get another Toro valve, and just switch out the guts. A pro would only replace what was needed, likely a diaphragm or a solenoid. Not every Toro product is a dud.
Is the valve itself not working, or you just want to replace it with a higher quality product. Like Wetboots said, especially if the valves are close together, you are going to have one heck of a time tearing everything apart to replace the valves. I would keep the valve bodies and just replace the internals of the valves still using Toro.
Tony Posey
Ridge Run Landscapes
Thanks for the rapid and on-point response. Sorry it took me this long to acknowledge your helpful advise.