Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Old Valve Diaphrams?
How do you find valve parts on a "hydro rain" valve #3591126?
RWL
give me more specifics on the valve...that isn't the part number I don't think.
But, it sounds like it might be a 1 inch Hydro Rain or Hardie HR-1
The 359 at the beginning of that serial number leads me to believe you will need the replacement diapragm Hr-1359 which is a 1 inch diaparagm.......Where are you in the country?????....you could call a Ewing or Horizon or Green Mark or whatever and tell them you need a 1359 diaphragm
I would recommend replacing the bonnet as well
Does SWarehouse carry these?
Sprinkler Solutions, Inc.
Arizona and Colorado
www.sprinklersolutions.net
Sprinkler Solutions, Inc.
Arizona and Colorado
www.sprinklersolutions.net
I would replace them with a Irritrol 2400T
Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers
Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers
valve
i been looking for that valve also. If your gonna replace the whole valve do yourself a favor and use a hunter or a rainbird valve.
Good job on bringing a post up that's 9 years old
Your other post did the same thing