You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Betty

New Member

Posts: 3

Location: USA

1

Friday, July 14th 2006, 7:21am

Hardie HR 6100 Crashed!!!!

I had floor installers using power saws, other equipment on our power source. My husband was in garage using air compressor and tripped a circuit. After power was restored timer won't turn sprinklers on. A code of A something 10 shows in led. The timer transformer is plug in a power strip on the wall,I unplugged and reset the power strip. Also I checked for blown fuse inside controller box.. It looks OK clear glass, no smoky residue.. What's next?... Help!!! 105 degrees out here in Calif.!!![V]

Thanks
Betty

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Friday, July 14th 2006, 10:10am

Unplug, and pull out any backup battery. Wait at least ten minutes. Replace any battery and try the controller again. By the way, the sprinkler valves can be manually opened, without any controller.

Rate this thread