I am looking at the part of my Febco that is broken and it has a spring down the middle with an o-ring at the top of the screw in threads. I 'THINK' that I need to replace the Bonnet but really not 100% sure. Could someone please let me know if Im right or wrong BEFORE I spend the money.
Thanks in advance.
Blonde in AZ
Sounds like you have a PVB 765 Series back-flow device. If this is the case you will need to get the two piece kit (part #905052, i think) ,or the bonnet kit (part # 90504 and / or the poppet kit (part # 905050). Best of luck ! <><
Josh
Irrigation /Landscape Lighting / Pump and Well Specialist
Ooops! My mistake, I should have clarified that a little. Those repair parts are for the 1" or the 1-1/4" 765 (PVB) series FEBCO back-flow device. I just assumed that we were talking about a residential system, and since most residential system are 1", I just assumed!
Josh
Irrigation /Landscape Lighting / Pump and Well Specialist