You are not logged in.

how do I adjust my Toro rotor 300-03 head

Jan

New Member

Posts: 2

1

Saturday, July 28th 2007, 4:27pm

how do I adjust my Toro rotor 300-03 head

I have older sprinkler lines and heads. How do I adjust my Toro rotor 300-03 sprinkler head? It should be at 180 degrees, and I need it turned so as to sprinkle the correct area. How do I do these things? I sure would appreciate anyone's help/advice.

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Sunday, July 29th 2007, 4:10am

If the coverage pattern is out of position, turn the entire head. The 300 series do not adjust. You change an internal part to obtain a different arc of coverage.

Jan

New Member

Posts: 2

3

Sunday, July 29th 2007, 7:25am

So since my rotor 300 series head is set to 180 degrees, that is where it stays unless I change an internal part....but I can reposition the coverage area by turning the entire head. Thanks, I will try this.
Rate this thread