You are not logged in.

how do I adjust my Toro rotor 300-03 head

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Jan

New Member

Posts: 2

1

Saturday, July 28th 2007, 4:27pm

how do I adjust my Toro rotor 300-03 head

I have older sprinkler lines and heads. How do I adjust my Toro rotor 300-03 sprinkler head? It should be at 180 degrees, and I need it turned so as to sprinkle the correct area. How do I do these things? I sure would appreciate anyone's help/advice.

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Sunday, July 29th 2007, 4:10am

If the coverage pattern is out of position, turn the entire head. The 300 series do not adjust. You change an internal part to obtain a different arc of coverage.

Jan

New Member

Posts: 2

3

Sunday, July 29th 2007, 7:25am

So since my rotor 300 series head is set to 180 degrees, that is where it stays unless I change an internal part....but I can reposition the coverage area by turning the entire head. Thanks, I will try this.
Rate this thread