You are not logged in.

Hunter HPV Valves not working at all.

Azsotaka64

New Member

Posts: 3

Location: USA

1

Saturday, November 3rd 2007, 11:59am

Hunter HPV Valves not working at all.

I just installed 2 Hunter HPV valves w/ flow control and they aren't working. I know that i wired them right, i one of the wires off each valve for the master valve and then other two wires would go 1 to each of the zones. I have tested these valves before i installed them and they worked. I used 16 gauge wire. There is no electrical current, nothing, not even a spark. Whats the problem? I know its not my controller? Help ME!!

mrfixit

Moderator

Posts: 1,510

Location: USA

2

Saturday, November 3rd 2007, 2:33pm

Try this. Move the wire/s from the master valve to the common terminal. You have the right idea just the wrong terminal.
If I can't fix it, it's broken!

Azsotaka64

New Member

Posts: 3

Location: USA

3

Saturday, November 3rd 2007, 4:02pm

Are you sure? What eles should I try if this doesn't work?
Rate this thread