You are not logged in.

Installing Hunter Riser

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Doug4018

Unregistered

1

Saturday, March 8th 2008, 5:31pm

Installing Hunter Riser

I'm trying to switch out the in ground sprinkler head for a shrub stick 24+ riser. It was my understanding I just remove the old sprinkler head and screw in the new pole with the new sprinkler head on top of the pole. When I removed the old Sprinkler head Hunter SRS system, the end left in the ground was male, and it's one piece coming from the pipe to the end, so you can't unscrew the male part to get to the female part. Soooo, I have a shrub stick with two male ends, that won't attach because the pipe in the ground has a male end. Any suggestions?

HooKooDooKu

Supreme Member

Posts: 683

2

Wednesday, March 12th 2008, 6:44am

Buy a female x female coupler?

Obviously means the riser will be a little higher, but since we're talking about a 24+ riser, would that be a problem?

I assume we're talking about 1/2" pipe. If so, you shouldn't have a problem finding a female x female coupler in the 1/2" PVC section of most places that sell plumbing.

Similar threads

Rate this thread