You are not logged in.

Replacing a hunter pop-up spray body/head

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Bruce Mc

Starting Member

Posts: 1

1

Thursday, May 22nd 2008, 8:53am

Replacing a hunter pop-up spray body/head

I am new to the forum, and very inexperienced with sprinkler systems. I have a pop-up hunter sprinkler, that came off, and a geyser of water shoots up until It turns off, or I turn it off.I found the head, but I do not know how to replace it. Can anyone help me with this? ?(

drpete

Moderator

Posts: 44

2

Thursday, May 22nd 2008, 9:21am

IS ther still a plastic body still in the ground? or does it apper that the entire head came out of the ground. If the plastic body is still in the ground then its as easy as putting what you have inside the boddy and screwing it by hand till its tight. if the whole head came off then dig up the pipe and it should screw back onto the pipe.

worachj

Advanced Member

Posts: 63

Location: Eagan, Mn

3

Thursday, May 22nd 2008, 12:28pm

You can try Hunters web site for support, get instruction, manuals and information.

Rotary sprinklers:
http://www.hunterindustries.com/Support/Installation_Adjustment/Rotors/default.htm

Spray sprinklers:
http://www.hunterindustries.com/Support/Installation_Adjustment/Sprays/default.htm

Similar threads

Rate this thread