You are not logged in.

junior999

Starting Member

1

Sunday, June 15th 2008, 11:25am

1 min 14 seconds..to fill 5 gall bucket........32 to 35 psi...

what can i do to install this system????????

will a booster pump help the gpm's?

hi.todd

Supreme Member

Posts: 417

Location: Houston, Texas

2

Sunday, June 15th 2008, 12:21pm

Before we have to spend money and go negative. Check your water meter and make sure it is open all the way. If there are any valves that are in the line at the entry to your house supply or entry to the house supply make sure they are open all the way. You can do this by opening a hose bib on the side of the house and closing the water meter. Then as you open it watch and listen to the spray so that you can be sure it is open all the way. This is the best way to do it if you don't have a pressure guage and don't want to buy one. There maybe other good ideas out there. this is a good start before extra design measures are needed.

Dan
Good Luck
:thumbsup:
:thumbup: :thumbsup:

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

3

Monday, June 16th 2008, 6:05am

Property size? How much lawn are you watering?

Similar threads

Rate this thread