Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Calculate psi based on gpm?
Am designing an irrigation system that will be supplied by a tank and pump. The distance between the supply and valve manifold is ~100β via 1 ΒΌβ pvc with ~5β of lift. I need to know gpm and psi to properly design system. I ran pump to check volume at this distance/grade. Pump produced ~34gpm. Question ... with above data, can I calculate PSI?
Thanks.
Now you can add a tee and a shutoff valve and a pressure gauge to your pipe near the manifold location and run your test again. Since the pressure gauge will be upstream of the added shutoff valve, you can partially close the valve until you get a certain pressure reading - say 30 or 40 psi. Then you measure the flow. Simple, and no guesswork required.