Irrigation design for a novice
Hello,
I have a unique property and am looking for some design help. I am a master electrician and a pretty good fake plumber. I am sure the installation is not a big issue for me but the design to start is an issue, mainly for ordering parts. The large flat areas are obviosly not hard to figure but my Hhanging plants and the long thin strips have me conserend. If you could look at the attachment of the property layout and give me a few pointers on tyupe of head or valve to use where, I would be very greatful!! I think Hunter is the way to go here, but all advice will be heeded. Here are the particulars: am in the process of designing a system for my model home. I will also install myself. I have included a detailed drawing of the property. Here are the particulars:
This will be fed off a well, currently the well produces 10 gal a minute or so by pump but it only has 150 gallons in the pipe and recovers only one gallon per minute or so. With that, I feel the system will be reverse designed, I am planning to install storage tank(s) and a pump. So I plan on 400 - 800 gallons of storage, and the pump will be what ever you say it should be. I will install another well if I need to, but I would like to avoid that, I should be able to get 1200+ gallons of water a day out of the existing well to fill tanks
As far as the plan goes, I made it as detailed as I could, but here are some particulars:
1) Green areas are grass areas
2) Purple areas are bark mulch, shrub and flower areas
3) 4 Blue poles will have hanging plants on them which I want to feed with something like a 1/4" line that I can give them a squirt a few times a day for a minute or so. This also applies to the porch area which has 8 or 10 hanging plants and a few on the stairs. I will pipe along the porch with 1/2" pipe and put 1/4" lines off that with petcocks
4) Whereas this was a "future thing" I installed underground sleeves everywhere to valve boxes everywhere.
5) Grade is pretty much flat everywhere except the one 10'x275' strip down the side and the 30x100 or so piece in the lower right at the driveway entrance. They drop about 12" every 30' or so.
Ok, they wont let me attach my sketch, to big. Anyone who want to help, I can send off my plan to you to look at. And I am not looking for someone to really design this thing.....althogh that would be nice....Just advice on what heads and valves to use where.
Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Joe