I would like to install a in ground sprinkler system. The System includes a system with 1" copper through a WAtts RPZ .009. I'm planning for 11 zones, 6 in the front/side and 5 in the back/side. My measured PSI is 65PS (WATTS RPZ indicates 12 PSI loss)
From the RPZ to the farthest point in the front yard is 120 ft, and farthest point in the back yard is 225 feet, should I install one 6 port maifold for the front yard and one 5 port manifold in the backyard? The manifolds would physically exist about 110 - 120 feet apart.
Basement-->1 1/4" Copper through wall to exterior ---> WATTS RPZ 1"--> 1' Copper ---> 1" PVC Mainfold1(frontyard(next to RPZ)) ----------PVC40(110/120feet)--------Mainfold2(backyard).............Then off to heads...
Should I place all of the manifolds in one place and run the Poly Pipe to front and backyard?
Newbie DIY... In advance thank you.
I have been using www.irrigationtutorials.com as a study guide, but nothing replaces experience.