You are not logged in.

Leaking Rotors

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

dmqblueribbon

Starting Member

Posts: 1

1

Monday, July 27th 2009, 1:35pm

Leaking Rotors

I am in the process of switching out old Toro 500 series rotors with new super 800 rotors on an existing system, 19 total on 6 zones ( no more than four rotors per zone ). After changing and testing each rotor I have a problem in two of the zones with the new rotors one in each zone leaking water and not popping up. I spoke to Toro and they told to turn on the zone with the problem, manualy pull up the head and then gently step on the head and pump it up and down four times and this should fix the problem. I did this but it did not fix the problem, could I have a bad rotors? any suggestions would be appreciated

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Monday, July 27th 2009, 3:35pm

Swap heads. You did buy some extras, right?

Similar threads

Rate this thread