You are not logged in.

Imperial Valet Timer

gee

New Member

Posts: 3

1

Wednesday, August 12th 2009, 8:53pm

Imperial Valet Timer

Hi:
I have an Imperial Valet Timer. It was working well for over 15 years. Since last week in the Auto mode the timer and the day dials work but the station dial does not buge at the set time the sprinklers do not come on. If I move the station dial beyond the off position manually then the dial moves automatically to station #1 and the sprinklers come on and the unit cycles through all the stations as programmed.

I reset day and time etc but no luck. Any help will be very welcome.

Thanks
Gee

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Thursday, August 13th 2009, 3:26am

Replace the failed microswitch.

gee

New Member

Posts: 3

3

Saturday, August 15th 2009, 7:36am

Replace Microswitch

Hi:
Can you plese let me know where exactly the microswitch is located.
Thanks
Gee

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

4

Monday, August 17th 2009, 7:44pm

You might consider a repair service. This controller uses line voltage and soldered connections.

gee

New Member

Posts: 3

5

Wednesday, August 19th 2009, 5:52am

Microswitch

Thank you.

Might be cheaper to buy a new unit as the controller is already very old.

Gee

rainman016

New Member

Posts: 7

6

Wednesday, September 9th 2009, 8:55pm

15 years you say?

Definitely Replace the controller.

Similar threads

Rate this thread