You are not logged in.

Mounting valve at 90 degree angle?

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

casey0999

Unregistered

1

Wednesday, February 3rd 2010, 1:05pm

Mounting valve at 90 degree angle?

Hello, regarding a valve such as the Hunter PGV-100GS: Is it necessary to mount this valve, or a similar valve, with the solenoid vertically (ie perpendicular to the ground), or is it also ok to mount it with the solenoid horizontal (ie parallel to the ground). This is an indoor application, and I have limited clearance above the valve.

Thanks

mrfixit

Moderator

Posts: 1,510

Location: USA

2

Wednesday, February 3rd 2010, 1:31pm

The valve should function just fine. I've seen 100 valves installed this way. Never the valve in question though. Will your install be up to code? I have no idea.

Similar threads

Rate this thread