You are not logged in.

sprimkler valve not working

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

azabache75

Starting Member

Posts: 1

1

Wednesday, March 10th 2010, 3:54pm

sprimkler valve not working

A week ago i started my watering system and it worked fine. but yesterday i turned it on and i did not have the usual water pressure and i went to the valve box that is below ground and when i opend it it looked like water had gone in and some dirt had washed into the wires and the valves and while looking the dirt looked back like something had burnt or the wires , so i turned the bonnet screw that is on top and it did not make a difference as the water presseure was the same , so i am not sure if its the solenoid or the spring inside . can someone help on giving me ideas on what to test or look for ?

mrfixit

Moderator

Posts: 1,510

Location: USA

2

Thursday, March 11th 2010, 8:15pm

Hi, sounds like there's a couple of problems.
The black soil is from a very old leak. I equate it
to the soil at the bottom of a lake. Black n smelly. It can also turn the wires black. They're not burnt.
So number one you have a leak.
You need to dig that box up and clean it out. Look for a leaky valve or
a leak in the pipes.

Is there more than one valve in that box? Do all the valves exhibit low pressure?

The low pressure could be from the valve itself or possibly a break in the line.

You need to determine which then go from there.

Similar threads

Rate this thread