You are not logged in.

Adjustment of flow control and solenoid on valve (Hunter SRV)

SNovruz

Starting Member

Posts: 1

1

Thursday, June 10th 2010, 10:02pm

Adjustment of flow control and solenoid on valve (Hunter SRV)

Hi,

I just recently sort out the problems with leaking of valves. All zones of springler systems were running well. But afterward, new problem occurs with stations where all parts (internal) of valves and solenoids were replaced by new ones (to fix problem with leaking). Stations are not watering.



Looks like I need to adjust flow control and solenoid on valve.



I need an advice how to adjust of flow control and solenoid on valve.



Thanks in advance.

HooKooDooKu

Supreme Member

Posts: 683

2

Friday, June 11th 2010, 9:55am

Can you manually operate the zones with a quater turn of the selinoid? Not that I've worked with much equipment, but the valves I've got installed in my yard, I had to tighten the selinoids down pretty tight.

Now if you can't so much as get the zones to turn ON manually, then it would sound like the flow control is completely closed.

Similar threads

Rate this thread