You are not logged in.

Off message

kevinmdevil91

Unregistered

1

Monday, August 9th 2010, 8:09pm

Off message

I just replaced a bad solenoid valve and now the controller shows "off" and will not change/come to life when I move to try and turn it on to water. Everything is plugged in and I cannot tell why the controller seems to have died. The whole system worked fine earlier today before the valve went bad and I could not get the water to stop without using the shut off valve and replacing the solenoid. Any ideas

mrfixit

Moderator

Posts: 1,510

Location: USA

2

Tuesday, August 10th 2010, 3:07pm

Reset the controller. Look for a blown fuse. Make sure you hooked the wires up correctly to the new valve if it happens again.

Similar threads

Rate this thread