Pro-c problem

billt

Starting Member

Posts: 1

Saturday, August 28th 2010, 10:20am

Pro-c problem

We have 10 zones setup and after having system off for a few days due to rain the system is now running zones 3 and 8 all the time when any other zone is one. I have tried a run thru all zones with the ground disconnected and that does not seem to have fixed it as i would assume if that was going to work as you passed thru the #3 vlave to #4 that the #4 would have shut off properly. Thanks for any help

Go to the top of the page
Quote

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

Saturday, August 28th 2010, 11:21am

You may have valves that are physically stuck open. Sometimes you can get them to close by opening the master valve only, with none of the zones energized.

Go to the top of the page
Quote

Similar threads

- Controllers »
- Problem with Hunter Pro-C: Program repeats (Apr 26th 2006, 3:08am)
- Controllers, Sensors, & Remotes »
- controller or module or solenoid or wiring??? (Oct 10th 2007, 4:55pm)
- Design Issues »
- Design Pressure & GPM (May 2nd 2007, 5:41pm)
- Controllers, Sensors, & Remotes »
- No AC (May 4th 2006, 4:47pm)
- Controllers, Sensors, & Remotes »
- Outside timer for inside use...? Hunter Pro C (Apr 17th 2005, 8:54pm)

SPRINKLER TALK FORUM - You Got Questions, We've Got Answers

Pro-c problem

Pro-c problem

Similar threads