You are not logged in.

Rainbird SST600i zone problem

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

SandiR2

Unregistered

1

Thursday, September 16th 2010, 12:55pm

Rainbird SST600i zone problem

Up until 4-6 weeks ago my system was working fine. For unknown reason(s), now zone 3 does not work. When I use the controller to manually turn on each zone, when I turn on zone 3, the heads in zone 2 come on (but not the heads in zone 3). When zone 2 is turned on manually, those heads do come on correctly, so the wiring is not simply switched. I tried moving the wire from zone 3 to zone 6 (currently empty), but that did not change anything -- zone 2 heads still came on.

Any ideas?

SandiR2

Unregistered

2

Thursday, September 16th 2010, 1:14pm

sorry - ignore this! I just realized I put it in the wrong section

oops, put this in the wrong area. will post it in the troubleshooting section instead. thanks!

Similar threads

Rate this thread