You are not logged in.

No Pressure to Sprinkler Head

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

lfawcett

Starting Member

Posts: 1

1

Tuesday, September 21st 2010, 10:02am

No Pressure to Sprinkler Head

Anyone heard of this?
I went to replace a sprinkler head to get better coverage.
I took off the old, installed the new rotary head.
When I turned on the zone, the flow was weak.
So I took off the new head and cleaned it out and flushed the line.
When I put the new head back on, no flow at all.
I took off the new head and turned on the zone again. The OTHER heads working fine, but now I have NO water pressure to this head.
What did I do wrong? How can I fix it?
Thanks for your suggestions!

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Tuesday, September 21st 2010, 1:50pm

Blockage. You might need to reverse-flush the line.

Similar threads

Rate this thread