SPRINKLER TALK FORUM - You Got Questions, We've Got Answers »
Help Choosing The Right Sprinkler Products »
Backflow Devices »
Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Tuesday, March 15th 2011, 8:51am
What kind of backflow prevention valves do I need?
Hi,
We bought a new house in St. Louis, MO last year. Our county
requires a permit to install a lawn irrigation system and backflow preventer. I
am planning to install a new irrigation system on my yard myself.
Our home has two water outlets slightly above the ground
level. Each outlet will be connected to three inline valves for sprinklers and
drip irrigation. I guess most sprinklers will be located below the outlet. To
my best knowledge, in this case, I just need a vacuum breaker since the highest
sprinklers are located lower than the outlet. The problem is two sprinklers and
a drip irrigation tubing may be located at the same level of the outlet. So, I
am curious if I need RP backflow preventers to pass the inspection.
I see many vacuum breakers ($10-200) and RP backflow
preventers ($250-300) of different types and prices. Which one should I buy?
Thanks,
Yong
We bought a new house in St. Louis, MO last year. Our county
requires a permit to install a lawn irrigation system and backflow preventer. I
am planning to install a new irrigation system on my yard myself.
Our home has two water outlets slightly above the ground
level. Each outlet will be connected to three inline valves for sprinklers and
drip irrigation. I guess most sprinklers will be located below the outlet. To
my best knowledge, in this case, I just need a vacuum breaker since the highest
sprinklers are located lower than the outlet. The problem is two sprinklers and
a drip irrigation tubing may be located at the same level of the outlet. So, I
am curious if I need RP backflow preventers to pass the inspection.
I see many vacuum breakers ($10-200) and RP backflow
preventers ($250-300) of different types and prices. Which one should I buy?
Thanks,
Yong
Tuesday, March 15th 2011, 10:16am
You should ask your water supplier, or pretend like you are getting a permit for your sprinkler system from the city and ask what they require. You may not have a choice. Even if your drip emitters are the same elevation as the sprinkler heads (PVB) You can raise the PVB 12 inches above the tallest drip emitter. If this is not a workable idea due to the piping and head placement then you may need an RP or DC depending on the local codes.
Good Luck.
You may want to add in to the budget the cost of a backflow certification once installed. This is to insure that it is working properly after installation. As a tester myself, I was surprised how many brand new installed units failed.
Good Luck.
You may want to add in to the budget the cost of a backflow certification once installed. This is to insure that it is working properly after installation. As a tester myself, I was surprised how many brand new installed units failed.
Similar threads
-
- Control Valves »
-
Anti siphon
(Jan 30th 2009, 4:27pm)
-
- Backflow Devices »
-
Backflow prevention
(May 1st 2006, 10:23am)
-
- Backflow Devices »
-
Backflow or Anti-siphon valve?
(May 16th 2003, 12:49pm)
-
- Backflow Devices »
-
Backflow prevention
(Dec 31st 2001, 6:06am)
-
- Backflow Devices »
-
rainbird backflow prevention
(Feb 2nd 2003, 2:22am)